Shop 37° JIC Seals

Overview

Your Ultimate Solution for eliminating leaks!

Evolving higher pressure and more demanding hydraulic systems expose the metal to metal flare fitting which makes it very difficult to obtain a permanent leak free flared fitting joint. Flared Fitting Leaks are most commonly caused by misalignment, surface damage and vibration in the field.

The entire seal is coated with a dry-to-the-touch, baked-on Loctite™ sealant. When inserted into a fitting, the concentric rings form multiple seals down the face of the flare, while the Loctite coating fills minor imperfections, dramatically increasing the integrity of the fitting. New ISO and NFPA standards strongly recommend seals for all fittings.

The sealing rings prevent environmental debris and aggressive cleaning solvents from attacking the sealing face while the Loctite™ protects the face from fretting, galling and over-tightening. And unlike ORFS fittings, the Flaretite Seal will not fail during a fire, allowing atomized hydraulic oil to fuel the fire.